Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
mplayer [2013/06/28 11:35]
beandog
mplayer [2013/06/28 15:58] (current)
beandog
Line 1: Line 1:
 ====== mplayer ====== ====== mplayer ======
  
-=== mplayer ​config ===+**mplayer** is my multimedia player of choice.
  
-<code bash> +  * [[mplayer helper scripts]] 
-# Always use X11 display +  * [[mplayer slave protocol]]
-# This is helpful if you are logging in remotely through a shell, but watching it on a screen +
-display=:0+
  
 +=== blu-ray ===
 +
 +Playing Blu-Rays (unencrypted)
 +
 +<​code>​
 +mplayer br:// -bluray-device /​path/​to/​disc
 +</​code>​
 +
 +=== Dolby Digital (AC3) through SPDIF ===
 +
 +Send audio through the SPDIF device to the audio receiver
 +
 +<​code>​
 +mplayer movie.mkv -ao alsa:​device=spdif -ac hwac3
 +</​code>​
 +
 +=== PAL playback ===
 +
 +For movies with the wrong aspect (PAL), that should be flat but show up 
 +in 4/3 try this:
 +
 +<​code>​
 +mplayer airborne.vob -monitoraspect 1.00
 +</​code>​
 +
 +That should straighten it out. :)
 +
 +Also, sometimes mplayer <​nowiki>​dvd://</​nowiki>​ will play them correctly.
 +
 +=== archives: ~/​.mplayer/​config ===
 +
 +<​code>​
 +# *** Please leave notes as to reasons for each config
 +#
 +# MythVideo does *not* call any profiles by default.
 +# Default player setting is: mplayer-resume --filename
 +
 +# *** DEFAULTS ***
 +
 +# Testing VDPAU by default
 +vo=vdpau
 +display=:0
 # This will also use "​mplayer.conf"​ in current working directory # This will also use "​mplayer.conf"​ in current working directory
 use-filedir-conf=1 use-filedir-conf=1
- 
-# Cache 25 MB of the file before playing 
-# This is helpful on older hardware or ones that just need a second to start up 
 # Could try cache-min x% instead # Could try cache-min x% instead
 cache=24576 cache=24576
- +fontconfig=1
-# Always fullscreen+
 fs=1 fs=1
- 
-# Use Dolby Digital / DTS passthrough to audio receiver 
 # Make sure to unmute "​IEC598 1" in alsamixer # Make sure to unmute "​IEC598 1" in alsamixer
 ao=alsa:​device=hdmi ao=alsa:​device=hdmi
 ac=hwac3,​hwdts,​ ac=hwac3,​hwdts,​
-</​code>​ 
  
-=== MPlayer config profiles ===+# *** PROFILES: IN USE ***
  
-Force pan & scan+# Redundant 
 +[hdmi] 
 +ao=alsa:​device=hdmi
  
-<​code>​+# TODO: Experiment with -vf crop exact measures
 [panscan] [panscan]
 panscan=1 panscan=1
 aspect=4:3 aspect=4:3
-</​code>​ 
  
-Use SPDIF hardware for output 
- 
-<​code>​ 
 [spdif] [spdif]
 ao=alsa:​device=spdif ao=alsa:​device=spdif
 ac=hwac3,​hwdts,​ ac=hwac3,​hwdts,​
-</​code>​ 
  
-Specific entries for extensions +# All my wishlist features have been ported to LAVF demuxer. ​ Upstream will 
- +# play around with switching it on and off as the default. ​ Flip it on here 
-<​code>​+# always.
 [extension.mkv] [extension.mkv]
 demuxer=lavf demuxer=lavf
Line 63: Line 93:
 [extension.m2ts] [extension.m2ts]
 vo=vdpau,xv vo=vdpau,xv
-</​code>​ 
  
-== Force VDPAU to use codecs ==+# Called by MythVideo on Series_Name.sh 
 +[series]
  
-It used to be that MPlayer would need these passed specifically 
  
-<​code>​+# *** PROFILES: EXPERIMENTAL *** 
 + 
 +[vo.xvmc] 
 +vo=xvmc, 
 +vc=ffmpeg12mc,​ 
 +#​hardframedrop=1 
 + 
 +# Much to my annoyance, mplayer will not use the vdpau playback video codecs by default.
 [vo.vdpau] [vo.vdpau]
 vo=vdpau vo=vdpau
 vc=ffmpeg12vdpau,​ffwmv3vdpau,​ffvc1vdpau,​ffh264vdpau,​ffodivxvdpau,​ vc=ffmpeg12vdpau,​ffwmv3vdpau,​ffvc1vdpau,​ffh264vdpau,​ffodivxvdpau,​
 +
 +[letterbox]
 +vf=crop=720:​368
 +#​vf=crop=704:​272:​10:​104
 +#aspect=4:3
 +
 +[playlist]
 +lircconf=/​home/​steve/​.mplayer/​lirc/​music
 +
 +[extension.mp3]
 +ac=mp3
 +lircconf=/​home/​steve/​.mplayer/​lirc/​music
 +</​code>​
 +
 +=== archives: ~/​.mplayer/​input.conf ===
 +
 +<​code>​
 +RIGHT seek +3
 +LEFT seek -2
 +UP seek +30
 +DOWN seek -30
 +</​code>​
 +
 +=== archives: ~/​.mplayer/​lircrc ===
 +
 +<​code>​
 +begin
 + prog = irexec
 + button = 1
 + config = date > /tmp/steve
 +end
 +
 +begin
 + flags = startup_mode
 + mode = mplayer
 +end
 +begin osd_menu
 +begin
 + prog = mplayer
 + button = up
 + config = menu up
 + flags = quit
 +end
 +begin
 + prog = mplayer
 + button = down
 + config = menu down
 + flags = quit
 +end
 +begin
 + prog = mplayer
 + button = left
 + config = menu left
 + flags = quit
 +end
 +begin
 + prog = mplayer
 + button = right
 + config = menu right
 + flags = quit
 +end
 +begin
 + prog = mplayer
 + button = ok
 + config = menu ok
 + flags = quit
 +end
 +begin
 + prog = mplayer
 + button = exit
 + config = menu hide
 + mode = mplayer
 + flags = quit
 +end
 +begin
 + prog = mplayer
 + button = menu
 + config = menu hide
 + mode = mplayer
 + flags = quit
 +end
 +begin
 + prog = mplayer
 + button = stop
 + config = menu hide
 + mode = mplayer
 + flags = quit
 +end
 +end osd_menu
 +
 +
 +
 +begin
 + prog = mplayer
 + button = power
 + config = quit
 +end
 +begin
 + prog = mplayer
 + button = play
 + config = seek +0
 + config = speed_set 1
 +end
 +begin
 + prog = mplayer
 + button = pause
 + config = pause
 +end
 +begin
 + prog = mplayer
 + button = stop
 + config = quit
 +end
 +begin
 + prog = mplayer
 + button = |<<
 + config = seek_chapter -1 0
 +end
 +begin
 + prog = mplayer
 + button = >>|
 + config = seek_chapter +1 0
 +end
 +# cc / red
 +begin
 + prog = mplayer
 + button = red
 + config = vobsub_lang eng
 + config = vobsub_lang -1
 +end
 +# menu / menu
 +begin
 + prog = mplayer
 + button = green
 + config = switch_ratio 1.3333
 + config = switch_ratio 1.77778
 +end
 +# guide / green
 +begin
 + prog = mplayer
 + button = menu
 + config = osd_show_property_text "​${metadata/​title}"​ 2400
 + config = osd_show_text ""​
 + #config = osd_show_property_text "​${filename}"​ 2400
 + #config = set_menu view_metadata
 + #config = menu cancel
 + #mode = osd_menu
 +end
 +# info / yellow
 +begin
 + prog = mplayer
 + button = yellow
 + config = osd 3
 + config = osd 1
 +end
 +# exit / exit
 +begin
 + prog = mplayer
 + button = exit
 + # old
 + config = get_time_pos
 + # new
 + # config = get_property time_pos
 +end
 +begin
 + prog = mplayer
 + button = exit
 + config = get_property filename
 +end
 +begin
 + prog = mplayer
 + button = exit
 + config = quit
 +end
 +# prev / blue
 +# exit; if using series-resume will reset playlist
 +begin
 + prog = mplayer
 + button = blue
 + config = quit 255
 +end
 +begin
 + prog = mplayer
 + button = up
 + config = seek +30
 +end
 +begin
 + prog = mplayer
 + button = down
 + config = seek -10
 +end
 +begin
 + prog = mplayer
 + button = right
 + config = seek +30
 +end
 +begin
 + prog = mplayer
 + button = left
 + config = seek -10
 +end
 +begin
 + prog = mplayer
 + button = >>
 + config = seek +60
 +end
 +begin
 + prog = mplayer
 + button = <<
 + config = seek -60
 +end
 +begin
 + prog = mplayer
 + button = mute
 + config = mute
 +end
 +begin
 + prog = mplayer
 + button = ch_up
 + config = audio_delay 0.1
 +end
 +begin
 + prog = mplayer
 + button = ch_down
 + config = audio_delay -0.1
 +end
 +begin
 + prog = mplayer
 + button = 1
 + config = seek +60
 +end
 +begin
 + prog = mplayer
 + button = 2
 + config = seek +120
 +end
 +begin
 + prog = mplayer
 + button = 3
 + config = seek +180
 +end
 +begin
 + prog = mplayer
 + button = 4
 + config = seek +240
 +end
 +</​code>​
 +
 +=== archives: ~/​.mplayer/​menu.conf ===
 +
 +<code xml>
 +<​keybindings name="​default">​
 +    <binding key="​UP"​ cmd="​menu up" />
 +    <binding key="​DOWN"​ cmd="​menu down" />
 +    <binding key="​LEFT"​ cmd="​menu left" />
 +    <binding key="​RIGHT"​ cmd="​menu right" />
 +    <binding key="​ENTER"​ cmd="​menu ok" />
 +    <binding key="​ESC"​ cmd="​menu cancel"​ />
 +    <binding key="​HOME"​ cmd="​menu home" />
 +    <binding key="​END"​ cmd="​menu end" />
 +    <binding key="​PGUP"​ cmd="​menu pageup"​ />
 +    <binding key="​PGDWN"​ cmd="​menu pagedown"​ />
 +    <binding key="​MOUSE_BTN0"​ cmd="​menu click" />
 +    <binding key="​MOUSE_BTN2"​ cmd="​menu cancel"​ />
 +</​keybindings>​
 +<​keybindings name="​filesel"​ parent="​list">​
 +    <binding key="​BS"​ cmd="​menu left" />
 +</​keybindings>​
 +<​keybindings name="​chapsel"​ parent="​list"​ />
 +<​keybindings name="​txt"​ parent="​list"​ />
 +<​keybindings name="​pt"​ parent="​list"​ />
 +
 +<txt name="​man"​ file="​manpage.txt"/>​
 +
 +<filesel name="​open_file"/>​
 +<filesel name="​open_list"​ file-action="​loadlist '​%p'" ​
 + title="​Open a playlist: %p"
 + filter="/​etc/​mplayer/​extensions_filter"​
 + actions="​d:​run '​mp_loader \'​%p\'​ d',​c:​run '​mp_loader \'​%p\'​ c'"​ />
 +
 +<chapsel name="​select_chapter"​ />
 +
 +<pt name="​jump_to"/>​
 +
 +<console name="​console0"​ height="​80"​ vspace="​0">​Welcome to MPlayer</​console>​
 +
 +<txt name="​man"​ file="​manpage.txt"/>​
 +
 +<pref name="​general_pref"​ title="​General">​
 +      <e property="​osdlevel"​ name="​OSD level"/>​
 +      <e property="​speed"​ name="​Speed"/>​
 +      <e property="​loop"​ name="​Loop"/>​
 +</​pref>​
 +
 +<pref name="​demuxer_pref"​ title="​Demuxer">​
 +</​pref>​
 +
 +
 +<pref name="​osd_sub_pref"​ title="​Subtitles">​
 +      <e property="​sub"​ name="​Subtitles"/>​
 +      <e property="​sub_visibility"​ name="​Visibility"/>​
 +      <e property="​sub_forced_only"​ name="​Forced sub only"/>​
 +      <e property="​sub_alignment"​ name="​Alignment"/>​
 +      <e property="​sub_pos"​ name="​Position"/>​
 +      <e property="​sub_delay"​ name="​Delay"/>​
 +      <e property="​sub_scale"​ name="​Scale"/>​
 +</​pref>​
 +
 +<pref name="​audio_pref"​ title="​Audio">​
 +      <e property="​volume"​ name="​Volume"/>​
 +      <e property="​balance"​ name="​Balance"/>​
 +      <e property="​mute"​ name="​Mute"/>​
 +      <e property="​audio_delay"​ name="​Delay"/>​
 +</​pref>​
 +
 +<pref name="​colors_pref"​ title="​Colors">​
 +      <e property="​gamma"​ name="​Gamma"/>​
 +      <e property="​brightness"​ name="​Brightness"/>​
 +      <e property="​contrast"​ name="​Contrast"/>​
 +      <e property="​saturation"​ name="​Saturation"/>​
 +      <e property="​hue"​ name="​Hue"/>​
 +</​pref>​
 +
 +<pref name="​video_pref"​ title="​Video">​
 +      <e property="​fullscreen"​ name="​Fullscreen"/>​
 +      <e property="​panscan"​ name="​Panscan"/>​
 +      <menu menu="​colors_pref"​ name="​Colors ..."/>​
 +      <e property="​ontop"​ name="​Always on top"/>​
 +      <e property="​rootwin"​ name="​Root window"/>​
 +      <e property="​framedropping"​ name="​Frame dropping"/>​
 +      <e property="​vsync"​ name="​VSync"/>​
 + </​pref>​
 +
 +
 +<cmdlist name="​pref_main"​ title="​Preferences"​ ptr="<>"​ >
 +    <e name="​General ..." ok="​set_menu general_pref"/>​
 +    <e name="​Audio ..." ok="​set_menu audio_pref"/>​
 +    <e name="​Video ..." ok="​set_menu video_pref"/>​
 +    <e name="​Subtitles ..." ok="​set_menu osd_sub_pref"/>​
 +    <e name="​Back"​ ok="​menu cancel"/>​
 +</​cmdlist>​
 +
 +<pref name="​properties"​ title="​Stream Properties">​
 +      <e txt="​${filename}"​ name="​Name"/>​
 +      <e txt="​${video_format}"​ name="​Video Codec"/>​
 +      <e txt="​${video_bitrate}"​ name="​Video Bitrate"/>​
 +      <e txt="​${width} x ${height}"​ name="​Resolution"/>​
 +      <e txt="​${audio_codec}"​ name="​Audio Codec"/>​
 +      <e txt="​${audio_bitrate}"​ name="​Audio Bitrate"/>​
 +      <e txt="​${samplerate},​ ${channels}"​ name="​Audio Samples"/>​
 +</​pref>​
 +
 +<pref name="​view_metadata"​ title="">​
 +      <e txt="​${metadata/​collection/​title}"​ name="​Series"/>​
 +      <e txt="​${metadata/​title}"​ name="​Title"/>​
 +      <e txt="​${metadata/​season/​part_number}"​ name="​Season"/>​
 +      <e txt="​${metadata/​episode/​part_number}"​ name="​Episode"/>​
 +      <!-- <e txt="​Season ${metadata/​season/​part_number},​ Episode ${metadata/​episode/​part_number}"​ name="​Track"/>​ -->
 +      <e name="​Properties"​ ok="​set_menu properties"​ />
 +</​pref>​
 +
 +<cmdlist name="​main"​ title="​MPlayer OSD menu" >
 +      <e name="​Pause"​ ok="​pause"/>​
 +      <e name="​Chapter ..." ok="​set_menu select_chapter"​
 +                            left="​seek_chapter -1" right="​seek_chapter +1"/>​
 +      <e name="​Prev/​Next ..." ok="​set_menu jump_to"​
 +                            left="​pt_step -1" right="​pt_step 1"/>​
 +      <e name="​Open ..." ok="​set_menu open_file"/>​
 +      <e name="​Open playlist ..." ok="​set_menu open_list"/>​
 +      <e name="​Help"​ ok="​set_menu man"/>​
 +      <e name="​Pref"​ ok="​set_menu pref_main"/>​
 +      <e name="​Properties"​ ok="​set_menu properties"/>​
 +      <e name="​Metadata"​ ok="​set_menu view_metadata"/>​
 +      <e name="​Console"​ ok="​set_menu console0"/>​
 +      <e name="​Quit"​ ok="​quit"/>​
 +</​cmdlist>​
 +
 +</​code>​
 +
 +=== archives: mplayer notes ===
 +
 +** Rip embedded media **
 +
 +<​code>​
 +mplayer -dumpstream -dumpfile matrix.mov http://​embed.site.com/​movie.mov
 +mplayer -dumpaudio -dumpfile radio.mp3 http://​webradio.com/​radio.mp3
 +</​code>​
 +
 +** Rip Realplayer movies **
 +
 +<​code>​mencoder -ovc lavc -lavcopts vcodec=mpeg4 -oac mp3lame -o filename.avi http://​url.to.streaming.video</​code>​
 +
 +** Capture a few frames for a screenshot **
 +
 +<​code>​mplayer dvd:// -vo jpeg -ss 90 -frames 30 -ao null</​code>​
 +
 +** List options **
 +
 +<​code>​mplayer -list-options</​code>​
 +
 +** Screenshot **
 +
 +Works for MPEG2
 +
 +<​code>​mplayer movie.mpg -noframedrop -ss 360 -vo jpeg:​quality=50 -frames 2 -nosound -vc ffmpeg12</​code>​
 +
 +** -playing-msg **
 +
 +<​code>​
 +Not really sure where you would use this, but getting it to work was a 
 +bit tricky:
 +
 +mplayer /​var/​media/​101._The_Force_Phantom.mkv -nosound -quiet ​
 +-playing-msg \$\{filename\}\\n -vo null
 +
 +prints out the filename and then a line break
 +</​code>​
 +
 +** Print out options **
 +
 +<​code>​
 +mplayer −list−options <command line>
 +mplayer -input cmdlist <​slave>​
 +mplayer -input keylist <​events>​
 +</​code>​
 +
 +** Display MKV title **
 +
 +<​code>​
 +osd_show_property_text "​${metadata/​title}"​ 2400
 </​code>​ </​code>​

Navigation