Differences

This shows you the differences between two versions of the page.

--- mplayer [2013/06/28 11:36]
beandog
+++ mplayer [2013/06/28 15:58] (current)
beandog
@@ Line 1: / Line 1: @@
 ====== mplayer ======
-=== mplayer config ===
+**mplayer** is my multimedia player of choice.
-<code bash>
+  * [[mplayer helper scripts]]
-# Always use X11 display
+  * [[mplayer slave protocol]]
-# This is helpful if you are logging in remotely through a shell, but watching it on a screen
-display=:0
+=== blu-ray ===
+Playing Blu-Rays (unencrypted)
+<code>
+mplayer br:// -bluray-device /path/to/disc
+</code>
+=== Dolby Digital (AC3) through SPDIF ===
+Send audio through the SPDIF device to the audio receiver
+<code>
+mplayer movie.mkv -ao alsa:device=spdif -ac hwac3
+</code>
+=== PAL playback ===
+For movies with the wrong aspect (PAL), that should be flat but show up
+in 4/3 try this:
+<code>
+mplayer airborne.vob -monitoraspect 1.00
+</code>
+That should straighten it out. :)
+Also, sometimes mplayer <nowiki>dvd://</nowiki> will play them correctly.
+=== archives: ~/.mplayer/config ===
+<code>
+# *** Please leave notes as to reasons for each config
+#
+# MythVideo does *not* call any profiles by default.
+# Default player setting is: mplayer-resume --filename
+# *** DEFAULTS ***
+# Testing VDPAU by default
+vo=vdpau
+display=:0
 # This will also use "mplayer.conf" in current working directory
 use-filedir-conf=1
-# Cache 25 MB of the file before playing
-# This is helpful on older hardware or ones that just need a second to start up
 # Could try cache-min x% instead
 cache=24576
+fontconfig=1
-# Always fullscreen
 fs=1
-# Use Dolby Digital / DTS passthrough to audio receiver
 # Make sure to unmute "IEC598 1" in alsamixer
 ao=alsa:device=hdmi
 ac=hwac3,hwdts,
-</code>
-=== MPlayer config profiles ===
+# *** PROFILES: IN USE ***
-Force pan & scan
+# Redundant
+[hdmi]
+ao=alsa:device=hdmi
-<code>
+# TODO: Experiment with -vf crop exact measures
 [panscan]
 panscan=1
 aspect=4:3
-</code>
-Use SPDIF hardware for output
-<code>
 [spdif]
 ao=alsa:device=spdif
 ac=hwac3,hwdts,
-</code>
-Specific entries for extensions
+# All my wishlist features have been ported to LAVF demuxer.  Upstream will
+# play around with switching it on and off as the default.  Flip it on here
-<code>
+# always.
 [extension.mkv]
 demuxer=lavf
@@ Line 63: / Line 93: @@
 [extension.m2ts]
 vo=vdpau,xv
-</code>
-== Force VDPAU to use codecs ==
+# Called by MythVideo on Series_Name.sh
+[series]
-It used to be that MPlayer would need these passed specifically
-<code>
+# *** PROFILES: EXPERIMENTAL ***
+[vo.xvmc]
+vo=xvmc,
+vc=ffmpeg12mc,
+#hardframedrop=1
+# Much to my annoyance, mplayer will not use the vdpau playback video codecs by default.
 [vo.vdpau]
 vo=vdpau
 vc=ffmpeg12vdpau,ffwmv3vdpau,ffvc1vdpau,ffh264vdpau,ffodivxvdpau,
+[letterbox]
+vf=crop=720:368
+#vf=crop=704:272:10:104
+#aspect=4:3
+[playlist]
+lircconf=/home/steve/.mplayer/lirc/music
+[extension.mp3]
+ac=mp3
+lircconf=/home/steve/.mplayer/lirc/music
+</code>
+=== archives: ~/.mplayer/input.conf ===
+<code>
+RIGHT seek +3
+LEFT seek -2
+UP seek +30
+DOWN seek -30
+</code>
+=== archives: ~/.mplayer/lircrc ===
+<code>
+begin
+	prog = irexec
+	button = 1
+	config = date > /tmp/steve
+end
+begin
+	flags = startup_mode
+	mode = mplayer
+end
+begin osd_menu
+begin
+	prog = mplayer
+	button = up
+	config = menu up
+	flags = quit
+end
+begin
+	prog = mplayer
+	button = down
+	config = menu down
+	flags = quit
+end
+begin
+	prog = mplayer
+	button = left
+	config = menu left
+	flags = quit
+end
+begin
+	prog = mplayer
+	button = right
+	config = menu right
+	flags = quit
+end
+begin
+	prog = mplayer
+	button = ok
+	config = menu ok
+	flags = quit
+end
+begin
+	prog = mplayer
+	button = exit
+	config = menu hide
+	mode = mplayer
+	flags = quit
+end
+begin
+	prog = mplayer
+	button = menu
+	config = menu hide
+	mode = mplayer
+	flags = quit
+end
+begin
+	prog = mplayer
+	button = stop
+	config = menu hide
+	mode = mplayer
+	flags = quit
+end
+end osd_menu
+begin
+	prog = mplayer
+	button = power
+	config = quit
+end
+begin
+	prog = mplayer
+	button = play
+	config = seek +0
+	config = speed_set 1
+end
+begin
+	prog = mplayer
+	button = pause
+	config = pause
+end
+begin
+	prog = mplayer
+	button = stop
+	config = quit
+end
+begin
+	prog = mplayer
+	button = |<<
+	config = seek_chapter -1 0
+end
+begin
+	prog = mplayer
+	button = >>|
+	config = seek_chapter +1 0
+end
+# cc / red
+begin
+	prog = mplayer
+	button = red
+	config = vobsub_lang eng
+	config = vobsub_lang -1
+end
+# menu / menu
+begin
+	prog = mplayer
+	button = green
+	config = switch_ratio 1.3333
+	config = switch_ratio 1.77778
+end
+# guide / green
+begin
+	prog = mplayer
+	button = menu
+	config = osd_show_property_text "${metadata/title}" 2400
+	config = osd_show_text ""
+	#config = osd_show_property_text "${filename}" 2400
+	#config = set_menu view_metadata
+	#config = menu cancel
+	#mode = osd_menu
+end
+# info / yellow
+begin
+	prog = mplayer
+	button = yellow
+	config = osd 3
+	config = osd 1
+end
+# exit / exit
+begin
+	prog = mplayer
+	button = exit
+	# old
+	config = get_time_pos
+	# new
+	# config = get_property time_pos
+end
+begin
+	prog = mplayer
+	button = exit
+	config = get_property filename
+end
+begin
+	prog = mplayer
+	button = exit
+	config = quit
+end
+# prev / blue
+# exit; if using series-resume will reset playlist
+begin
+	prog = mplayer
+	button = blue
+	config = quit 255
+end
+begin
+	prog = mplayer
+	button = up
+	config = seek +30
+end
+begin
+	prog = mplayer
+	button = down
+	config = seek -10
+end
+begin
+	prog = mplayer
+	button = right
+	config = seek +30
+end
+begin
+	prog = mplayer
+	button = left
+	config = seek -10
+end
+begin
+	prog = mplayer
+	button = >>
+	config = seek +60
+end
+begin
+	prog = mplayer
+	button = <<
+	config = seek -60
+end
+begin
+	prog = mplayer
+	button = mute
+	config = mute
+end
+begin
+	prog = mplayer
+	button = ch_up
+	config = audio_delay 0.1
+end
+begin
+	prog = mplayer
+	button = ch_down
+	config = audio_delay -0.1
+end
+begin
+	prog = mplayer
+	button = 1
+	config = seek +60
+end
+begin
+	prog = mplayer
+	button = 2
+	config = seek +120
+end
+begin
+	prog = mplayer
+	button = 3
+	config = seek +180
+end
+begin
+	prog = mplayer
+	button = 4
+	config = seek +240
+end
 </code>
@@ Line 204: / Line 486: @@
 </cmdlist>
+</code>
+=== archives: mplayer notes ===
+** Rip embedded media **
+<code>
+mplayer -dumpstream -dumpfile matrix.mov http://embed.site.com/movie.mov
+mplayer -dumpaudio -dumpfile radio.mp3 http://webradio.com/radio.mp3
+</code>
+** Rip Realplayer movies **
+<code>mencoder -ovc lavc -lavcopts vcodec=mpeg4 -oac mp3lame -o filename.avi http://url.to.streaming.video</code>
+** Capture a few frames for a screenshot **
+<code>mplayer dvd:// -vo jpeg -ss 90 -frames 30 -ao null</code>
+** List options **
+<code>mplayer -list-options</code>
+** Screenshot **
+Works for MPEG2
+<code>mplayer movie.mpg -noframedrop -ss 360 -vo jpeg:quality=50 -frames 2 -nosound -vc ffmpeg12</code>
+** -playing-msg **
+<code>
+Not really sure where you would use this, but getting it to work was a
+bit tricky:
+mplayer /var/media/101._The_Force_Phantom.mkv -nosound -quiet
+-playing-msg \$\{filename\}\\n -vo null
+prints out the filename and then a line break
+</code>
+** Print out options **
+<code>
+mplayer −list−options <command line>
+mplayer -input cmdlist <slave>
+mplayer -input keylist <events>
+</code>
+** Display MKV title **
+<code>
+osd_show_property_text "${metadata/title}" 2400
 </code>

Trace:

Differences

Navigation

Search

Toolbox